Using the product:
Power on the device by holding the power button for 0.5 seconds. The device is on when the Hyperice logo lights up Red.
Once the device is on, simply press the temperature icon button to cycle between level
1-3 heat. If vibration is desired, then press the vibration icon button to cycle between
the three modes of vibration. The device will automatically start when the temperature or
vibration button is pushed.
You can disable either the Heat or Vibration by cycling through the settings until the respective LED turns off. Or you can hold the respective button for 1 second.
The device can be powered off at any time by holding the power button for 0.5 seconds.
Wearing the product:
The Venom 2 line is meant to be used over a layer of clothing. If applying to direct skin, we recommend only using Heat Level 1.
Venom 2 Back:
Secure the product around your waist using the main velcro strap. Use the secondary strap to secure a tighter fit if needed.
Venom 2 Leg:
Secure the product around the knee or thigh area using the velcro strap. The product is designed for the leg and will not fit correctly if used on the arm or elbow.
Venom 2 Shoulder:
The Venom Shoulder is Left/Right shoulder specific. The tag on the product will confirm which shoulder it is designed for. The control pod will sit at the front of your shoulder for easy access. The long strap goes around your back and under your opposite arm. Slide your arm through the spandex sleeve until the pod is sitting on your shoulder.