The Hyperice X is equipped with a lithium ion battery. The battery automatically charges when the power supply is connected to the Hyperice X device and an electrical outlet.
Setting up your device:
Step 1: Place your device directly on skin. Place the electronics box on your thigh. Align the colored ring to your kneecap.
Step 2: Fasten straps so the device is snug against the skin. See "Troubleshooting" if straps are not sized correctly.
Step 3: Download the free Hyperice App on an iOS or Android device. Open the Hyperice App, create an account, and pair your device.
Step 4: Turn your HypericeX device on by pressing the power button
Connecting to the Hyperice App:
To connect your device to the Hyperice App via Bluetooth® make sure that your device is turned on, Bluetooth is turn on in your phone, and your device is within close proximity. Select a routine within the Hyperice App and if prompted tap "scan for devices." Select your device when it pops up on the screen. The LED light on your device will turn purple while searching for connection and then will turn green once it's synced to your phone. HyperSmart will automatically start your device. If you need to adjust the temperature or duration of your routine, simply open the Hyperice App and change the settings to your preference.
Turn off the device
To turn off the device, press the power button and confirm that the LED is off. The device will turn itself off after idling for five minutes.
Charging your device
The Hyperice X is equipped with a rechargeable lithium ion battery. The internal battery is designed to allow use of Hyperice X anywhere - even when power outlets are not available.
The Hyperice X device may need to be plugged in before first use. The battery will provide power for approximately 60-90 minutes of continuous use. Using the device on the maximum heat or cold setting requires more power and may possibly shorten the battery life during that treatment.
It takes approximately three hours to fully charge the battery when the device is plugged in and not in use. The LED light on your device will turn solid green indicating charging is complete. You can use your Hyperice X while it's plugged in to the power cord.